appear properly. Set your computer to output the signal to only the external monitor.

For details, refer to the operating instructions supplied with your computer.

Note

To connect a Macintosh computer equipped with a video output connector of a type having two rows of pins, use a commercially available plug adaptor.

Connecting a VCR

This section describes how to connect the projector to a VCR.

For more information, refer to the instruction manuals of the equipment you are connecting.

To connect to a video or S video output connector

Rear side

VPL-EX70

 

to audio

 

 

output (L)

to audio

to video

to S

output (R)

output

video

 

 

output

 

 

VCR

 

1Stereo audio connecting cable (not supplied) (Use a no-resistance cable.)

2Video cable (not supplied) or S-Video cable (not supplied)

To connect to a video GBR/Component output connector

Rear side

VPL-EX70

Picture the Projecting

to

to audio

audio

output (R)

output

 

(L)

 

to video GBR/ component output

VCR

1Signal Cable (not supplied)

HD D-sub 15-pin (male) ↔ 3 ⋅ phono jack

2Stereo audio connecting cable (not supplied) (Use a no-resistance cable.)

Notes

•For stereo audio connection, connect the stereo audio connecting cable to the AUDIO INPUT connector.

•Set the aspect ratio using “Aspect” on the INPUT SETTING menu according to the input signal.

•When you connect the projector to a video GBR output connector, select “Video GBR” or when you connect the projector to a component output connector, select “Component” with the “Input-A Signal Sel.” setting on the SET SETTING menu.

Connecting the Projector

19