kUSB key

This function is not provided in this projector.

lAPA (Auto Pixel Alignment) key

Automatically adjusts a picture to its clearest while a signal is input from a computer.

For details, see “Smart APA” in “The SET SETTING Menu” on page 33.

mLENS key

This function is not provided in this projector.

nKEYSTONE (Trapezoidal distortion correction) /TILT key

Adjusts the vertical trapezoidal distortion of the image. Pressing this key, the adjustment menu are displayed. Use the arrow keys (v/V/b/B) for adjustment.

oPIC MUTING key

Cuts off the picture. Press again to restore the picture.

pAUDIO MUTING key

Cuts off the sound. Press again to restore the sound.

qFREEZE key

Freezes the projected picture. To cancel the frozen picture, press the key again. This function is available when the PC signal is input.

Before using the Remote

Commander

Pull out the clear film from the lithium battery holder.

To replace a battery

1 Pull out the battery cover by a thin stick inserting to a hole, as shown the illustration.

2 Install the lithium battery.

Face the + side up.

3 Put the lithium battery holder back into the Remote Commander.

Notes on the lithium battery

•A button type lithium battery (CR2025) is used in the Remote Commander. Do not use batteries other than CR2025.

•Keep the lithium battery out of the reach of children.

•Should the battery be swallowed, immediately consult a doctor.

Notes on Remote Commander operation

•Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Aim the Remote Commander at the front of the remote control detector or the screen.

•The operation range is limited. The shorter the distance between the Remote Commander and the remote control detector is, the wider the angle within which the commander can control the projector becomes.

16 Location and Function of Controls