Connections and Preparations

This section describes how to install the projector and screen, how to connect the equipment from which you want to project the picture, etc.

Unpacking

Check the carton to make sure it contains the following items:

• Remote control (1) and

• AC power cord (1)

Size AA (R6) batteries (2)

• Lens cap (1)

 

When you have purchased the projector,

 

the lens cap is put onto the lens.

 

Remove this lens cap when you use the

 

projector.

 

• Operating Instructions (this manual)

Preparations and Connections

Inserting the batteries into the remote control

Push and slide to open.

Insert the batteries E side first as shown in the illustration. Inserting them forcibly or with the polarities reversed may cause a short circuit and may generate heat.

Caution about handling the remote control

•Handle the remote control with care. Do not drop or step on it, or spill liquid of any kind onto it.

•Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

11