Screen Menu

The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc.

.

Menus the Using

Note

These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (1 page 69).

Wide Mode

You can set the aspect ratio of the picture to be displayed for the

(Video signal)

current input signal. (1 page 30) This item is enabled only when a

 

video signal (preset memory numbers 1 to 14) (1 page 66) is input.

 

Wide Zoom: A 4:3 aspect ratio picture is enlarged naturally to fill the

 

screen. The upper and lower portions of the screen are slightly cut off.

 

Normal: A 4:3 aspect ratio picture is displayed in the center of the

 

screen and enlarged to fill the screen vertically.

 

Full: A picture squeezed to 4:3 aspect ratio is displayed in its original

 

aspect ratio. When a 4:3 aspect ratio picture is displayed, the picture is

 

enlarged horizontally to fill the 16:9 screen.

 

Zoom: A 16:9 aspect ratio picture is enlarged vertically and horizontally

 

in the same ratio to fill the screen.

 

You can switch settings by pressing WIDE MODE on the remote

 

control.

 

 

Wide Mode

You can set the aspect ratio of the picture to be displayed for the

(Computer signal)

current input signal. (1 page 31) This item is enabled only when a

 

computer signal is input.

 

Full 1: Displays a picture on the whole of the screen without changing

 

the aspect ratio of the original picture.

 

Full 2: Displays a picture on the whole of the screen.

 

Zoom: A 16:9 aspect ratio picture is enlarged vertically and horizontally

 

in the same ratio to fill the screen.

 

You can switch settings by pressing WIDE MODE on the remote

 

control.

 

 

45