Sony VPL-HW10 menu. The, on the Setup, 14 Select “Yes”, original position, 8Remove the air filter, 7Remove the filter holder, 10 Attach the filter holder

7Remove the filter holder.8Remove the air filter.

Claws

9Attach the new air filter so that it fits into the each claws (10 positions) on the filter holder.

Note

Attach the air filter aligning it with the shape of the filter holder.

Also, do not touch the fan after removing the air filter that is set deep inside the projector.

10 Attach the filter holder.

Note

The projector will not turn on unless the filter holder is securely closed.

11 Wipe dust off the ventilation holes (intake) with a soft cloth.

Ventilation holes (intake)		Others
12 Place the project back on its
original position.
13 Turn on the projector, then
select the desired setting item
on the Setup	menu. The

menu screen below will be appeared.14 Select “Yes”.

Caution

Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire.

Notes

•Be sure to use an LMP-H201 Projector Lamp for replacement. If you use lamps other than the LMP-H201, the projector may malfunction.

61