Sony VPL-HW10 manual 43

Expert Setting	NR (Noise Reduction)
	Reduces the roughness or noise of the picture.
	Usually, select “Off”.
	If the picture is rough or noisy, select a setting from among “Low”,
	“Middle” or “High” according to the input signal source.
	MPEG NR (MPEG Noise Reduction)
	Reduces block noise and mosquito noise, in particular in digital
	signals.
	Block NR: Reduces digital noise that appears in mosaic-like pattern.
	Mosquito NR: Reduces digital noise that appears near the outline of the
	picture.
	Film Mode
	According to the film source you have selected, make a setting for
	playback.
	Auto: Reproduces a 2-3 or 2-2 Pull-Down format video signal, such as
	film sources, in a smooth picture movement. When a video signal
	other than 2-3 or 2-2 Pull-Down format is input, the picture is played
	back in progressive format.
	Off: Plays back the picture in progressive format without detecting
	video signals automatically.
	Black Level Adj. (Adjust)
	Produces a bolder, dynamic picture.
	Set according to the input signal source.
	High: Gives higher emphasis to the black color.
	Low: Gives lower emphasis to the black color.
	Off: Cancels this feature.
	Gamma Correction
	Adjusts the response characteristics of the tone of the picture.
	Select a favorite tone from 3 options.
	Gamma 1: Makes the scene a little brighter overall.
	Gamma 2: Makes the scene brighter overall.
	Gamma 3: Makes the scene darker overall.
	Off: Gamma Correction is “Off”
	x.v.Color
	Set this item when playing back an x.v.Color video signal.
	Set this item to “On” when connecting the projector with equipment that
	supports x.v.Color and playing back an x.v.Color video signal.
	For details on x.v.Color, see “About the x.v.Color” (1 page 54).
	Color Space
	You can convert the range of color reproduction.
	Normal: Converts the color to Hi-Vision color.
	Wide: Reproduces more natural color tones in a wider range of color
	reproduction, compared to “Normal”.

Menus the Using

43