Installation Menu
The Installation menu is used for changing the installation settings.
V Keystone | Corrects the vertical trapezoidal distortion of the picture. |
|
| When the bottom of the trapezoid is longer than the top ( | ): |
Sets a lower value (– direction)
When the top of the trapezoid is longer than the bottom ( 
):
Sets a higher value (+ direction).
| Note |
|
|
|
|
|
|
| Depending on the picture position adjusted with the lens shift | ||||||
| feature, the aspect ratio of the picture may change from the original | ||||||
| or picture distortion may occur with V Keystone adjustment. | ||||||
|
|
|
|
|
|
|
|
Image Flip | Flips the picture on the screen horizontally and/or vertically. | ||||||
| Off: The picture does not flip. | ||||||
| HV: Flips the picture horizontally and vertically. | ||||||
| H: Flips the picture horizontally. | ||||||
| V: Flips the picture vertically. | ||||||
| Use this item for installation for the backside projection or ceiling | ||||||
| installation. | ||||||
|
|
|
|
|
|
|
|
Blanking | This feature allows you to adjust the displayable region within | ||||||
| the four directions of the screen. | ||||||
| Select each screen edge “Left / Right / Top / Bottom” on the | ||||||
| Blanking adjustment screen with M / m buttons. Adjust the desired | ||||||
| Blanking value with < / , button. | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note
When both the “Blanking” and the “V Keystone” are adjusted at the same time, the “Blanking” cannot be adjusted correctly. When using the “Blanking”, make sure that you set the “V Keystone” to “0”.
50