Switch the mecablitz to TTL mode.If necessary,
deactivate the controller function (only with Metz
TTL Remote Mode) and the secondary reflector.
4. Program auto flash modeonly DCS -V1, -V2,-F828
In the Program Auto Flash Mode the camera auto-
matically controls the aperture, the shutter speed
and the mecablitz in such a manner that optimum
results are achieved with mecablitz flashes in most
shooting situations, also in the fill-in flash mode.
Settings
Camera:
Select the Program AE Mode (camera sym-
bol) or SCN on your camera. Under SCN
you have the choice of TWILIGHT,LANDS-
CAPE or PORTRAIT.Now choose either Auto
Flash or Enforced Flash (see operating
instructions for the given camera).
mecablitz:Set the TTL Flash Mode on the meca-
blitz.
SCA 3602:Move switch to the position GN.The
position of switch is B.
5. Functions of mecablitz and camera
5.1 Flash readiness indication
When flash readiness has been reached,the flash-
ready indicator on the flash unit lights up and the
flash unit transmits a corresponding signal to the
adapter or camera.
The indicator lamp for flash recycling on the came-
ra goes out.The flash unit will not be triggered if a
picture is shot before the indicator lamp goes out,
with the result that the shot may be underexposed.
14
705 47 0025.A2-GB,I,E 20.02.2008 15:48 Uhr Seite 14