Additional Information

PrecautionsOn safety

Should any solid object or liquid fall into the cabinet, unplug the amplifier and have it checked by qualified personnel before operating it any further.

On power sources

•Before operating the amplifier, check that the operating voltage is identical with your local power supply.

The operating voltage is indicated on the nameplate on the back of the amplifier.

•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.

•If you are not going to use the amplifier for a long time, be sure to disconnect the amplifier from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.

•The AC power cord (mains lead) must be changed only at a qualified service shop.

On heat buildup

Although the amplifier heats up during operation, this is not a malfunction. If you continuously use this amplifier at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet.

On placement

•Place the amplifier in a location with adequate ventilation to prevent heat buildup and prolong the life of the amplifier.

•Do not place the amplifier near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

•Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.

•Do not place the amplifier near equipment such as a television, VCR, or tape deck. (If the amplifier is being used in combination with a television, VCR, or tape deck, and is placed too close to that equipment, noise may result, and picture quality may suffer. This is especially likely when using an indoor antenna (aerial). Therefore, we recommend using an outdoor antenna (aerial).)

On operation

Before connecting other components, be sure to turn off and unplug the amplifier.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine.

If you have any questions or problems concerning your amplifier, please consult your nearest Sony dealer.

Information Additional

19GB