SOYO SY-6BA+ III manual Cooling Fan Installation, CPU Cooling Fan

Hardware Setup SY-6BA+ III

Step 9. Cooling Fan Installation

1. CPU Cooling Fan

After you have seated the CPU properly on the processor, attach the 3-pin fan cable to the CPUFAN connector on the Motherboard. The fan will stop when the system enters into Suspend Mode. (Suspend mode can be enabled from the BIOS Setup Utility, [POWER MANAGEMENT] menu.)

To avoid damage to the system, install according to the following pin assignment:

CPU Cooling Fan

CPUFAN Pin Assignment

SENSOR 3

12V 2

GND 1

2. Chassis Cooling Fan & Power Cooling Fan

Some chassis also feature a cooling fan. This Motherboard features a CHAFAN connector to provide 12V power to the chassis fan. Connect the cable from the chassis fan to the CHAFAN 3-pin connector. Install according to the following pin assignment:

Chassis Cooling Fan

CHAFAN Pin Assignment

GND 12V SENSOR

1 2 3

Power Cooling Fan PWRFAN Pin Assignmen

SENSOR 3

12V 2

GND 1

Note: CPUFAN must be installed for this Motherboard, CHAFAN and PWRFAN are optional.

18