SOYO SY-6BA+ III manual Hardware Setup, Preparations

Hardware Setup	SY-6BA+ III
	Chapter 2
	HARDWARE SETUP

Congratulations on your purchase of SY-6BA+ III Motherboard. You are about to install and connect your new Motherboard.

Note: Do not unpack the Motherboard from its protective anti-static packaging until you have made the following

preparations.

2-1 PREPARATIONS

Gather and prepare all the following hardware equipment to complete the installation successfully:

1.Slot 1 processor with built-in CPU cooling fan (boxed type).

Note: This Motherboard supports non-boxed type CPUs. The heavier CPU cooling fan requires the installation of a CPU support stand.

2.DIMM memory module

3.Computer case and chassis with adequate power supply unit

4.Monitor

5.PS/2 Keyboard

6.Pointing Device (PS/2 mouse)

7.Speaker(s) (optional)

8.Disk Drives: HDD, CD-ROM, Floppy drive …

9.External Peripherals: Printer, Plotter, and Modem (optional)

10.Internal Peripherals: Modem and LAN cards (optional)

6