- Com Ports |
| Select the device to be connected on selected port. |
Dome | : None/Dome … | |
MUX | : None/DUPLEX/TRIPLEX/AUX IN/AUX I/O… | |
DVR485 | : None/ADR/SDR/IDR/AUX IN/AUX I/O… | |
DVR232 | : None/ADR/SDR/IDR/AUX IN/AUX I/O… | |
Save and Exit | Save the programmed data and return to the previous Menu | |
|
| (Exit without saving if you press ESC key) |
Note) AUX IN : auxiliary signal input ( simplex mode)
AUX I/O : when auxiliary signal input , respond to the signal (Half duplex mode)
-Set Slave kbd
Slave kbd | : ON/OFF | ON- Slave KBD exit, OFF- Not exist. | |
MUX control : ON/OFF | Set accessibility of the multiplexer menu at slave keyboard | ||
Dome Menu: ON/OFF | Set accessibility of the dome camera menu at slave keyboard | ||
Release :INF/001~200s | INF (Infinite) - Slave Keyboard user never have the control right of the | ||
|
|
| dome which is selected by master Keyboard users |
|
|
| 1 ~ 200s( Second) - After elapse of programmed time since master |
|
|
| Keyboard user use the dome, slave Keyboard user can get the control |
|
|
| right of the dome. |
Save and Exit | Save the programmed data and return to the previous Menu | ||
- Exit |
|
|
|
- Data Bank | - | Up/Download saved data of the dome | |
DataBank 1 : 001 | 001— Data from Dome ID 001 is exist on Bank 1 | ||
Upload |
| If you are sure to upload or clear data to the selected dome then | |
Clear Data | press Enter key, ESC key to cancel and exit. | ||
DataBank 2 : Empty |
| ||
DownLoad | If you are sure to download data from the selected dome then | ||
Exit |
|
| Press Enter key, ESC key to cancel and exit. |
- Alarm |
|
|
|
- Alarm Check : ON/OFF | Whether K/B check the alarm input of domes or not. | ||
|
|
| On : 32 domes, Off : 64 dome cameras supported. |
- Alarm Beep : ON/OFF | When dome’s alarm, beep sound on or off | ||
- Exit |
|
|
|
2.4 Maser & Slave Keyboard setting
You can use two keyboards at distant site.
Master keyboard should be setup as following procedure.
1.Check for dip switch the 7th of S2 “OFF”.
2.Press Ctrl + Menu. Check Slave KBD setting “ON”. (Network Set Slave Kbd Slave kbd:ON/OFF)
Slave keyboard need to setup as following procedure.
1.Check for dip switch the 7th of S2 “ON”.
2.If you setup all connection correctly (See Figure 4) and turn on slave keyboard, you can see following screen.
15
