SpectraLink Corporation | Installation, Configuration, and Administration |
| NetLink SVP Server (within IP environments) |
Alias IP Addresses are not necessary in Cisco systems.
Enable H.323 Gatekeeper
In certain H.323 protocol systems, the SVP Server may function as a gatekeeper. Enter Y to have the SVP Server function as the gatekeeper in the H.323 protocol environment.
Ethernet link
The SVP Server will
System Locked
This option is used to take the system down for maintenance. The default entry is N (No). Set it at Y (Yes) to prevent any new calls from starting. Return to N to restore normal operation.
Maintenance Lock
The system automatically sets this option to Y (Yes) after certain maintenance activities that require reset, such as changing the IP address. Maintenance Lock prevents any new calls from starting. Note that the administrator cannot change this option. It is automatically set by the system. Reset the system at exit to clear Maintenance Lock.
Inactivity Timeout (min)
Set the number of minutes the administrative module can be left unattended before the system closes it. This number can be from 1 to 100. If it is set to zero (0), the administrative module will not close due to inactivity.
QoS Configuration
Select this option to set the DSCP tags. See QoS Configuration section below.
Reset System
If this option is selected, you will be prompted to reset the NetLink SVP Server upon exiting this screen.
Reset All SVP Servers
If this option is selected, you will be prompted to reset all SVP Servers upon exiting this screen. This is necessary if you have changed configurations on other SVP Servers by using the SendAll option.
The NetLink SVP Server should be reset at the end of any maintenance procedure that requires a reset either via Maintenance Lock or manually via Reset System.
Note that resetting the NetLink SVP Server will terminate any calls in progress.
PN: | Page 23 |
