SpectraLink SVP100, SVP020, SVP010 manual

SpectraLink Corporation	Installation, Configuration, and Administration
	NetLink SVP Server (within IP environments)

•If any of the Traffic Class settings are set at any value (Value Y) other than Default, that setting (Value Y) will override the Administration setting.

		Administration
Traffic Class		Default	Value X
WT (In call)	Default	4	X
Priority High	Value Y	Y	Y
WT (Standby)	Default	0	X
Priority Med	Value Y	Y	Y
RTP	Default	4	X
Priority High	Value Y	Y	Y
PBX	Default	0	X
Priority Med	Value Y	Y	Y
Inter-SVP2	Default	0	X
Priority Med	Value Y	Y	Y
Administration	Default	0	X
Priority Low	Value Y	Y	Y

Note: Default DSCP settings will mark traffic for Best Effort handling under normal circumstances. Please consider changing these values based on the recommended QoS settings from your network hardware manufacturer to achieve prioritization for your voice traffic..

PN: 72-0178-01-F.doc Page 25