Installation
Risers
Risers (or air cushions) may have to be installed if the pipes knock or pound when flow of water stops. The risers are more efficient when installed as close as possible to the water supply faucets (refer to Figure 5).
1
2
W005I
1Risers (Air Cushions)
2Water Supply Faucets
Figure 5
Step 3: (Non-Gravity Drain Models Only) Connect Drain Hose to Drain Receptacle
Remove the drain hose from its shipping position on the rear of the washer by removing the shipping tape.
IMPORTANT: Drain receptacle must be capable of handling a minimum of
1
FLW1963N
1Shipping Tape
Figure 6
10 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 802733 |