Troubleshooting
Washer Symptom | Possible Cause/Solution |
|
|
Vibrates/Moves | • Make sure washer is level. Uneven leveling can cause vibration. |
Slightly | • Make sure washer is installed on a solid, sturdy and level floor. The washer should not be |
| installed on carpeting, soft tile, a platform or other weakly supported structures. |
| • Make sure rubber feet are installed on all four leveling legs. Refer to Installation section, |
| step 5. |
|
|
Is Noisy | • Make sure washer is level. Uneven leveling can cause vibration. |
| • Some sounds may be a part of normal operation for a frontload washer. |
|
|
Load is too Wet | • Wash load may be unbalanced. The washer may have limited the spin speed to prevent |
| damage to the machine. Redistribute the load. |
| • Load is too small. Add items to make full load. |
|
|
Wrong Water | • Make sure that the controls are properly set. |
Temperature | • Check fill hoses. Make sure hot faucet hose is connected to hot mixing valve (indicated |
| with “H” on the valve bracket) and cold faucet is connected to cold mixing valve (indi- |
| cated with “C” on the valve bracket). |
| • Make sure laundry room water heater is adjusted properly. |
|
|
28 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 802733 |