Standpipe Installation

Place the drain hose into the standpipe.

Remove the beaded tie-down strap from accessories bag and place around standpipe and drain hose and tighten strap to hold hose to standpipe. Refer to Figure 7. This will prevent the drain hose from dislodging from drain receptacle during use.

24 TO 36 in.

(61 TO 91.44 cm)

RECOMMENDED

HEIGHT

Flw1964N

1

FLW1964N

1Standpipe 2 in. (5.08 cm) or 1-1/2 in. (4 cm)

Figure 7

Installation

Step 4: (Gravity Drain Models Only) Connect Drain Outlet to Drain System

Remove drain fitting (four inches long) and hose clamp from accessories bag. Insert drain fitting into drain outlet hose. Clamp hose and fitting.

Connect the drain fitting to a vented drain system using a flexible connection (obtain locally). Inside diameter of fitting is 1.53 in. (3.89 cm) and outside diameter is 1.66 in. (4.22 cm). The drain system must be vented to prevent an air lock or siphoning.

IMPORTANT: Increasing the drain hose length, installing elbows, or causing bends will decrease drain flow rates and increase drain times, impairing machine performance.

2

1

Flw1935N

FLW1935N

1Drain Trough

2Drain Outlet Hose

Figure 8

802733

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11