
Installation
Step 7: Add Water to the WasherTo prevent damage to pump, do not run washer before adding at least one quart water to the tub. If the washer is run before any water is added, the pump seal may overheat, causing the pump to leak. Once installed, the water retained in the drain system from the previous cycle will provide sufficient cooling to prevent pump seal damage.
NOTE: The agitator should not be removed except for service. The washtub is designed to be self- cleaning.
TLW524N
Figure 11
Step 8: Check Lid Switch
Washer should stop filling, agitating and spinning when lid is opened.
TLW1974N
Figure 12
Step 9: Check InstallationRefer to Installer Checklist on the back cover of this manual and make sure that washer is installed correctly.
16 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 38970 |