![](/images/backgrounds/234935/234935-9216x1.png)
Installation
High Standpipe Installation
No. 562P3 Siphon Break Kit and No. 25863 Hose Coupling are not required for this type of installation.
1
2
Low Standpipe Installation
No. 562P3 Siphon Break Kit and No. 25863 Hose Coupling are required for this type of installation. This kit is available (as optional equipment at extra cost) through an authorized dealer or parts distributor. Installation instructions are supplied with the kit.
OPTIONAL: Raise the standpipe to the recommended height of 92 cm (36 inches).
1 2
MAXIMUM
STANDPIPE
HEIGHT NOT TO
EXCEED 1,5 m
(5 feet)
{
3
W296I
5
{
4
1Drain Hose
2Cut drain hose off this end to fit the washer installation.
3Standpipe
Figure 7
3
W295I
1Drain Hose Elbow
2562P3 Siphon Break Kit
3Standpipe
4Cut hose in this area and install No. 25863 hose coupling.
525863 Hose Coupling
Figure 8
14 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 38970 |