STEP3:Connecting Arm
1.Untie the wire on the Rod End Bearing; connect the Swing Arm (L) (10) with Connecting Arm (L) (8) and secure with a Hex Head Bolt (79), Rod End Sleeve (22), a Flat Washer (100), and a Nyloc Nut (91).Tighten using the wrenches provided (124 & 129).
2.Repeat the process for the Right Connecting Arm (R) (9) and Right Swing Arm (R) (11).
HARDWARE
#100. 5/16” x 20 x1.5T | #79. 5/16” x | #91. 5/16” x 7T |
Flat Washer | Head Bolt | Nyloc Nut |
(2 pcs) | ( 2 Pcs) | (2 pcs) |
| 9 | XE395 Elliptical Trainer |
