Assembly Video

To assist you in assembling your new Spirit Fitness elliptical, we have posted an assembly video at the following link: http://www.spiritfitness.com/customerservice/video/ellipticalvideos.html

Pre-Assembly

1.Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach under the bottom edge of the carton and pull it away from the cardboard underneath, separating the staples that join the two together. Lift the box over the unit and unpack.

2.Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are found, or parts are missing, contact your dealer immediately.

3.Locate the hardware package.The hardware is separated into four steps. Remove the tools first. Remove the hardware for each step as needed to avoid confusion.The numbers in the instructions that are in parenthesis (#) are the item number from the assembly drawing for reference.

Assembly Tools

#126. Phillips Head

#125. Short Phillips

Screwdriver

Head Screw Driver

#124. 13/14mm

#129. 12/14mm

Wrench

Wrench

5

XE395 Elliptical Trainer

395XE

Assembly Instructions

Page 9
Image 9
Spirit XE395 owner manual Assembly Instructions, Assembly Video Pre-Assembly, Assembly Tools