SETTING THE DIALING MODE
Set
1.Set
2.Lift the handset and press TALK, or press SPEAKER. Listen for a dial tone.
3.Press any number other than 0.
Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code, either.
If the dial tone stops, you have touch- tone service. Leave
TONE.
If the dial tone continues, you have pulse service. Set
PULSE.
4.Press TALK or place the handset on the base to hang up.
SETTING THE RINGER TONE/VOLUME
You can select one of four different ringer tone/volume settings on the handset. Re- peatedly press VOL/CID 8 or 9 (except during a call) to select the desired ringer set- ting. Each time you press a button, the phone rings at the selected setting and Ringer A High, Ringer A Low, Ring- er B High, or Ringer B Low appears.
Note: Pressing VOL/CID 8 at Ringer A High or VOL/CID 9 at Ringer B Low does not change the setting. Press the oppo- site arrow key to change the setting.
To set the base’s ringer volume, set RING VOL on the back of the base to OFF, LO, or
HI.
Note: When you set RING VOL to OFF, the base (and the handset if it is on the base) does not ring but other phones connected to the same phone line rings. If the handset is away from the base, it also rings.
TURNING AUTO TALK ON/ OFF
Your phone is preset so you must press TALK when you lift the handset from the base to answer a call. With auto talk turned on, you can answer a call by just lifting the hand- set from the base. If the handset is away from the base, you can answer by pressing any key.
Follow these steps to turn auto talk on or off.
1.Lift the handset and hold down CID. A menu appears with Auto Talk selected.
2.Press SELECT/CHANNEL to change the auto talk setting. On or Off appears.
3.Return the handset to the base or press CID to store the new setting.
Note: When auto talk is set to off, the hand- set continues to ring after you lift the handset from the base until you press TALK.
TURNING CALLER ID/CALL WAITING ON/OFF
If you subscribe to Call Waiting with Caller ID service, you can set the phone to show Call- er ID information for an incoming call even while you are using the phone.
Follow these steps to turn the Caller ID/Call Waiting feature on or off.
1. Lift the handset and hold down CID.
12 |
| Installation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|