2.Press 2 or VOL/CID 9 to select CIDCW (Caller ID/Call Waiting).
3.Press SELECT/CHANNEL to change the Caller ID/Call Waiting setting. On or Off appears.
4.Return the handset to the base to store the new setting.
STORING YOUR AREA CODE
You can store your local area code in the phone's Caller ID record so it does not show the area code if the received call is from your local area. If for some reason you need to dial the area code (or store it in the memory), you can add it afterwards. See “Adding/De- leting the Area Code” on Page 20.
Note: If your calling area requires
Follow these steps to store your area code.
1.Lift the handset and hold down CID.
2.Press 3 or VOL/CID 9 twice to select
Area Code.
3.Press SELECT/CHANNEL, then enter
your
Note: If an area code is already stored, it appears on the display. To delete the area code, press INTCM/DEL three times
or hold down INTCM/DEL, then enter your area code. You can use 6 or 7 to move the cursor and edit the area code.
4.Press SELECT/CHANNEL to store the area code, then press CID or return the handset to the base to clear the display.
ˆTelephone Operation
MAKING AND RECEIVING CALLS
To make a call, lift the handset and press TALK. Talk and the current volume setting (see “Adjusting the Handset Volume” on Page 14) appear, and the CHARGE/IN USE indicator on the base lights. Then dial the number. The number appears as you dial, then (after a few seconds) the call's elapsed time appears.
You can also dial the number then press TALK. Talk and the current volume setting appear, and the CHARGE/IN USE indicator on the base lights. The number you entered and the call’s elapsed time appear.
If you make a mistake, press INTCM/DEL until the incorrect entry is erased, then enter the correct number. To delete the entire number, hold down INTCM/DEL for at least 1 second.
When you receive a call, Incoming Call appears. To answer it, lift the handset from the base and press TALK. If auto talk is on, just lift the handset from the base. If the handset is away from the base, press any key. Talk and the current volume setting appear.
To end a call, place the handset on the base or press TALK.
Telephone Operation | 13 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|