Sprint Nextel owner manual Using Flash, Using Tone Services On A Pulse Line, Using Page/Intercom

43-5522.fm Page 15 Tuesday, September 12, 2000 3:12 PM

•On the handset, press RDL/PAUSE after pressing TALK to dial the last number dialed.

•The redial memory holds up to 32 digits, so you can redial long-distance as well as local numbers.

•The redial memory also holds pause entries. See “Entering a Pause” on Page 17.

USING FLASH

FLASH performs the electronic equivalent of a switchhook operation for special services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank-by- phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

1.Be sure PULSE-TONEis set to PULSE.

2.Dial the service's main number.

3.When the service answers, press / TONE. Any additional numbers you dial are sent as tone signals.

When you hang up, the phone automatically resets to pulse dialing.

USING PAGE/INTERCOM

You can use the phone as a two-way pager and intercom between the base and the handset. This is useful if the handset is away from the base and you want to locate it, or if you want to have a conversation between someone with the handset and someone at the base.

To page the base from the handset, press IN- TCM/DEL. Paging Base appears, and the base and handset ring. Press SPEAKER or INTCM/PAGE on the base to answer the page. Intercom appears.

To page the handset from the base, press IN- TCM/PAGE. The handset and base ring, and Paging appears. Press TALK or INTCM/DEL on the handset to answer the page. Inter- com appears.

To end an intercom call, press TALK on the handset, press SPEAKER on the base, or hang up the handset.

If a call comes in during an intercom conver- sation, either the person at the base or the person at the handset can answer the call. Press TALK on the handset or SPEAKER on the base once to end the intercom call, then press TALK or SPEAKER again to answer the incoming call.

Note: The intercom does not operate if the party being paged is already on a call.

Transferring a Call between the Handset and Base

You can use the phone's intercom feature to transfer a call between the handset and the base.

To transfer a call from the handset to the base, press INTCM/DEL. The call is placed on hold, and Paging Base and Hold appear.

Telephone Operation 15