SELECTING THE CHANNEL
The phone has 30 channels. If the call seems to disconnect for no reason during a call, press SELECT/CHANNEL on the handset to select a different channel. Scanning ap- pears while your phone searches for a clear channel.
ADJUSTING THE HANDSET VOLUME
To adjust the handset’s volume during a call, press VOL/CID 8 or 9 until you reach the desired volume level. Volume Maximum, Volume High, Volume Medium, or Volume Low appears.
The setting is maintained even after you hang up the phone.
Note: When you press VOL/CID 8 while the volume is maximum or 9 while the volume is low, the setting does not change and the phone beeps three times.
To switch to the handset while you are using the speakerphone, simply lift the handset off the base. If the handset is away from the base, press TALK, then press SPEAKER.
Using Both the Handset and Speakerphone
If someone else is using the speakerphone, press TALK on the handset to join the con- versation.
If someone else is using the handset, press SPEAKER on the base to join the conversa- tion.
During the call, one person can hang up and let the call continue at the other keypad.
Or, both people can hang up at the same time to end the call.
Note: If you hear a
USING THE
SPEAKERPHONE
To make or answer a call using the speaker- phone, press SPEAKER. The SPEAKER indi- cator lights. When you hear a dial tone, dial the number.
To set the speakerphone's volume, slide VOLUME on the right side of the base.
To end a speakerphone call, press SPEAKER again.
Switching Between the Handset and Speakerphone
To switch to the speakerphone while you are using the handset, press SPEAKER on the base. When you hear the conversation or dial tone on the speakerphone, press TALK on the handset.
USING REDIAL
You can quickly dial any of the last three numbers you dialed on the handset. Lift the handset and repeatedly press RDL/PAUSE until the number you want to dial appears. Then press TALK and the phone dials the number.
You can also dial the last number dialed us- ing the speakerphone. Press SPEAKER then REDIAL/PAUSE on the base.
Notes:
•The redial memory for each keypad is separate. You cannot redial a number you dialed on the handset’s keypad using REDIAL/PAUSE on the base’s key- pad, and vice versa.
14 | Telephone Operation | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|