Sprint Nextel owner manual Memory Dialing, Storing a Number in the Handsets Memory

43-5522.fm Page 16 Tuesday, September 12, 2000 3:12 PM

When the person at the base answers, press TALK. The call is released from hold and transferred to the base.

To transfer a call from the base to the hand- set, press INTCM/PAGE. The call is put on hold, and Paging and Hold appear. When the person with the handset answers, press SPEAKER. The call is released from hold and transferred to the handset.

MEMORY DIALING

You can store up to 30 phone numbers in memory (20 in the handset’s and 10 in the base’s memory), then dial a stored number by entering its memory location number.

You can also store a name with each number in the handset’s memory.

Use the supplied memory sticker to record the numbers you stored in the base’s memo- ry. Peel the backing from the sticker and at- tach the sticker to the base.

Storing a Number in the Handset's Memory

Notes:

•The phone beeps five times exits the storing process if you wait more than 20 seconds between each keypress.

•If you receive a call during memory entry, the phone exits the storing pro- cess.

1.Lift the handset.

2.Hold down MEM until Memory Store and a list of memory location numbers appear.

3.Press a number (01-20) or VOL/CID 8 or 9#to choose a two-digit memory loca- tion. Precede a single digit location num- ber with 0 — 01, 02, 03, and so on.

4.To store a name, press SELECT/CHAN- NEL. Store Name appears.

If you do not want to enter a name, skip to Step 6.

5.To enter a name, press VOL/CID 8 or 9 to select the characters and 6 or 7 to move the cursor.

Repeatedly press VOL/CID 9 to view the characters in alphabetical order. (The display shows uppercase letters first, then lowercase letters, numbers, and special characters.)

Notes:

•Press VOL/CID 8 to see the charac- ters in reverse alphabetical order.

•You can hold down VOL/CID 8 or 9 to scroll rapidly through the charac- ters.

•If you make a mistake, move the cur- sor over the error, then enter the cor- rect character, or press INTCM/DEL to delete a character. To delete all the characters, hold down INTCM/DEL for at least 1 second.

6.Press SELECT/CHANNEL. Store Num- ber appears.

7.Enter the phone number and any tone or pause entries (see “Using Tone Services on a Pulse Line” on Page 15 and “Enter- ing a Pause” on Page 17).

8.Press SELECT/CHANNEL. The phone beeps and Memory nn Stored appear (nn is the location number you selected). After 2 seconds, Memory Store appears. Repeat Steps 3–8 to store more numbers.

9.When you finish, press MEM.

16 Telephone Operation