SPX Cooling Technologies 1200, 1000 specifications Specifications, Specification Value, 1.0Base

Marley / Sigma 1000/1200 CoolingTower / Specifications: Base

Specifications Specification Value

1.0Base:

14

1.1	Furnish and install an induced-draft,	■Your specification base establishes the type, configuration, base
	crossflow-type, field-erected, wood-	material, and physical limitations of the cooling tower to be
	framed, PVC fill, industrial-duty cooling	quoted. During the planning and layout stages of your project,
	tower of _____ cell(s), as shown on	you will have focused your attention on a cooling tower selection
	Plans. The limiting overall dimensions	that fits your space allotment, and whose power usage is accept-
	of the tower shall be _____ wide, ___	able. Limitations on physical size and total operating horsepower
	__ long, and _____ high to the top of	avoid the introduction of unforeseen operational and site-related
	the fan cylinder. Total operating horse-	influences. Specifying the number of cells, and the maximum fan
	power of all fans shall not exceed	hp/cell will work to your advantage.
	____ hp, consisting of ___ @ _____ hp	Crossflow towers are noted for the accessibility and maintainabil-
	motor(s). Tower shall be similar and
	equal in all respects to Marley Model	ity of all operating components. The spacious interior provides
	_______.	easy access to fill, drift eliminators, all basin accessories—and is
		one of two primary accessways to the fan, Geareducer, and other
		mechanical components.
		At the fan deck level, the hot water distribution basins are easily
		inspected and cleaned—while the tower is operating, if you wish.
		The mechanical equipment can also be readily accessed from this
		level.
		Except for the cold water basin, no counterflow tower component
		requiring routine maintenance is as easily accessed. The confined
		areas that typify counterflow designs can make difficult work for
		maintenance personnel!