SPX Cooling Technologies FSIG-TS-08A specifications Plan, Section B, Section P

Marley / Sigma F Series CoolingTower / Engineering Data : Support 6

6" MIN	A SPACES AT 4'-0" = L	OPTIONAL PARTITION WALL
TYP	B AIR INLET FACE	FOR INDIVIDUAL CELL OPERATION

INTO IN OF CURBWALLS	CASED ENDWALLFACE	P
		CASED ENDWALLFACE
W
	B	AIR INLET FACE
		SUMP

		SEE NOTE 7	TOP OF BASIN CURB
		Plan	TOP OF PARTITION WALL
1'-6"	TOP OF BASIN CURB	1'-0"	1'-4"	1'-6"

OPERATING WATER

LEVEL RECOMMENDED

6" MIN

Section B						Section P
Tower		Dimensions		Operating Weight lb
Model
	A	W	L	Single Fan Cell	Each Cell Add
Note 4
F1211	4	26'-4"	16'-0"	39220	35920
F1221	4	28'-4"	16'-0"	41460	38160
F1231	5	28'-4"	20'-0"	48200	44860
F1241	6	28'-4"	24'-0"	55300	51980
F1251	6	32'-4"	24'-0"	61260	57880
F1261	7	32'-4"	28'-0"	68280	64800

NOTE

1Use this bulletin for preliminary layouts only. Do not use for construction. Obtain current drawings from your Marley representative.

2Tower weight is total wet operating weight of tower only ex- cluding water in the concrete basin.

3Purchaser to design, construct and furnish concrete basin complete to suit the general dimensions of current Marley drawings.

4Last number of model indicates number of cells. Change as ap- propriate for your selection. Primary engineering data is per cell.

5All anchor bolts complete with nut and washer will be furnished by others. Bolts are 3⁄4" diameter with 11⁄2" all thread projection. Material should be stainless steel.

6Maintain no less than 2'-0" of clear space at tower endwalls for construction purposes. Louvered faces must have unobstruct- ed air supply. If obstructions exist nearby, consult your Marley representative.

7Purchaser must design, construct, and furnish sump(s) and overflow(s) to suit requirements. The sump should be designed according to the pump manufacturer's recommendations.