Stamina Products 55-2065 owner manual Side

ASSEMBLY INSTRUCTIONS

STEP 5

Connect the LOWER CONNECTION WIRE(30) to UPPER CONNECTION WIRE(31). Insert the UPRIGHT(4) into the MAIN FRAME(1) and secure with SOCKET HEAD BOLTS(M8 x 25mm)(70), SOCKET HEAD BOLTS(M8 x 50mm)(71), and LOCK WASHERS(M8)(88).

NOTE: The opening in the channel on the UPRIGHT(4) must be facing toward the back as shown. HINT: If necessary, loosen the mounting SCREWS(M4 x 20mm)(76) for the LEFT and RIGHT

UPRIGHT COVERS(13, 14) to provide additional space for the UPRIGHT(4). Re-tighten these screws after the UPRIGHT(4) is assembled.

STEP 6

Connect the RIGHT PIVOTING ARM(94) to the PEDAL SLIDER(51) by attaching the RIGHT SLIDER CONNECTOR(92) onto the PEDAL SLIDER(51) with NYLOCK NUTS(M8)(85). Repeat on the left

side.

8