ERROR MESSAGES & TROUBLESHOOTING
Error Messages occur when there is a known issue / problem with the playback device. Below are the Error numbers, and explanation of the problem and how to correct it.
Err 01 TOC Read error - the disc’s Table of Contents cannot be read within 20 seconds - try with anoth- er disc or remove and clean the existing disc before replacing it
Err 02 GFS error - GFS signal cannot be detected within five seconds - try with another disc or remove and clean the existing disc before replacing it
Err 03 Focus error - after repeating the attempt eight times to focus, an error still occurs - try with another disc or remove and clean the existing disc before replacing it
Err 04
Err 05 Loading error - the open or close operation cannot be completed, even after retries, or there is an internal error - make sure that there are no obstructions preventing the tray’s operation
Err 06 Sled error - an internal drive error - try turning the power off, waiting a few seconds, and turn- ing it on again
Err 07 Error in communication between decks - try turning the unit off, waiting a few seconds, and turn- ing it on again
Err 10
NOTE:
If any of the numbered error messages are repeated, try using another disc.
If the errors continue with a number of discs, turn the unit off, wait for a few seconds, and turn it on again.
If the errors still continue or other error occurs, contact your local Stanton distributor for repair. A list of these distributors can be found online @ www.StantonDJ.com under “World Distributors”.
The C.504 will enter SLEEP mode after 30 min. of inactivity. To conserve electricity and the LCD, the screen will darken and may appear off; however the word SLEEP is partially visible. This is a normal procedure when the unit is not in use, to exit sleep mode simply press CUE or any other button.
For additional user support on this and other Stanton products contact DJ@Stantonmagentics.com or visit us online at www.Stantonmagnetics.com
