Stanton C.504 TEMPO/BPM FX RANGE Button, TIME/ENTER RECALL DISPLAY Button, VINYL Button, Fx Notes

16. TEMPO/BPM [FX RANGE] Button

Changes the mode of parameter display in the LCD between BPM (AUTO BPM or TAP BPM) dis- play mode and current selected mode.

Pressing and holding the SHIFT button then pressing this button changes the effect beat parameter directly when an effect is active. The Beat parameters are shown in the parameter display (on LCD).

NOTE::

FX RANGE parameters can only be selected after selecting the effect.

17. TIME/ENTER [RECALL DISPLAY] Button

Changes the time mode between elapsed time and remain time. When time mode is set to remain, “REMAIN” indicator in the LCD will light.

When in preset mode, pressing this button confirms the current setting.

Pressing and holding the SHIFT button then pressing this button selects the mode of parameter dis- play in the LCD from TEMPO, KEY, TAP, BPM, DIR, and track memory recall function.

18. PITCH RANGE [BANK] Button

Selects the pitch range from +/-4, 8, 16, 32, and 100%. The selected pitch range is momentarily dis- played in the parameter section of the LCD screen.

Pressing and holding the SHIFT button then pressing this button selects the memory bank for track memory. The selected bank (A-E) will light in the LCD.

19. VINYL Button

Turns the vinyl mode (scratch play mode) on and off. When vinyl mode is turned on, this button will light blue and scratching can be performed by using Jog wheel.

20. REV Button

Changes the playback direction between forward and backward. When this button lights blue, the playback direction is backward (Reversed).

21. DELAY Button

Turns the DELAY effect on and off. When DELAY effect is turned on, this button will light blue and delay time is controlled with Jog wheel.

22. FILTER Button

Turns on and off the FILTER effect. When FILTER effect is turned on, this button will light blue. Filter effect has two modes, manual filter and auto filter (pressing the FILTER button more than 1.5 sec- onds changes the filter effect mode).

Manual Filter: Filter frequency can be controlled with Jog wheel (default).

Auto Filter: Filter frequency is moved automatically and filter time can be controlled with Jog wheel. When auto filter effect is turned on, time parameter is controlled with Jog wheel.

23. FLANGE Button

Turns on and off the FLANGER effect. When FLANGER effect is turned on, this button will light blue and FLANGER time is controlled with Jog wheel.

FX NOTES:

Only one of these effects (DELAY, FILTER, or FLANGE) can be activated at a time.

If VINYL function is on, effect time and level cannot be controlled with Jog wheel (The priority is scratching).