Star Micronics 347F user manual Note The paper must not be glued to the core

Print speed:	Approx. 5.53 lines per sec.
Line spacing:	1/6-inch (initial setting), 1/8-inch, 1/12-inch,
	n/72-inch, n/144-inch
Paper feed method:	Friction feed
Paper feed speed:	Approx. 3 inches/sec.
Paper specifications
Paper type:	Ordinary bond and carbonless copy paper
Paper width:	82.5 ±0.5 mm (3.25 inches)
	76 ±0.5 mm (3.0 inches)
	57.2 ±0.5 mm (2.25 inches)
Roll diameter:	85 mm (3.35 inches) max.
Thickness	(single) 0.07 mm to 0.10 mm
	(copies) Original + 1 copy (Max. 0.14 mm)
	Original + 2 copies (Max. 0.2 mm)
	However, paper that can be cut with the auto
	cutter is one sheet of 0.06 – 0.085 mm
	thickness.
Internal diameter of roll:	12 ±1 mm
	Note: The paper must not be glued to the core.
Ink ribbon specifications
Ribbon type:	Cartridge cassette
Color:	Standard purple or optional black
Ribbon material:	Nylon (#40 denier)
Ribbon life:	Purple (standard) 6,000,000 characters
	Black (option) 1,600,000 characters
Interface:
Serial interface:	RS-232C serial interface (standard)
	20 mA current loop (option)
	RS-422A (option)
Parallel interface:	Centronics compatible
Data buffer:	Selectable between 1 K and 256 bytes
Peripheral unit drive circuit:	2 circuits (24 V, max. 1 A with a 1 circuit
	compulsion switch)
Power Supply:	AC120 V ±10 % 60 Hz (for US)
	AC230 V –10 % ~ 240 V + 6 % 50/60 Hz
	(for EU)
	AC220 V ±10 % 50/60 Hz (for Hong Kong,
	Korea)

APPENDIX

– 57 –