Star Micronics 347F user manual Loading the Paper, Removing the rear cover SP317

2. LOADING THE PAPER

2-1. SP317

1 Turn the power switch on the printer to the off position.

2 Set DIP switch 2-4 to match the width of the paper that is being used. (Refer to Installation Manual for DIP switch settings.)

DIP	ON	OFF
switches
2-4	3.25 inches	2.25 inches
	3.0 inches

(All the switches in the DIP switch array are factory preset to the “ON” position.)

3 To remove the rear cover lift it up approx. 3cm and push it backwards.

Fig. 2-1 Removing the rear cover

(SP317)

4 Dependant on the width of the paper

(2.25 or 3 inches), align the roll paper holders at the specified posi- tion .

Fig. 2-2 Mounting the roll paper holders

(SP317)

ENGLISH

– 5 –