GET TO KNOW YOUR WATER HEATER - GAS MODELS
A | Control Assembly | M | Display Enclosure |
B | Blocked Inlet Switch | ** N | Exhaust Elbow Assembly |
C | Blocked Outlet Switch | ** O | Condensate Tubing |
D | Fan Prover Switch | P | Off/On Switch |
E | Blower Assembly | Q | Display Label |
F | Burner Assembly | R | Hot Water Outlet |
G | Flame Sensor | *S | Electrical Outlet (120VAC) |
H | Hot Surface Igniter | T | Gas Supply |
I | Junction Box | U | Main Manual Gas Shutoff Valve |
J | Gas Valve Assembly | V | Union |
K | Display Board | W | Inlet Water Shutoff Valve |
L | Top Plastic Enclosure | X | Cold Water Inlet |
YInlet Dip Tube
Z T/P Relief Valve
AARating Plate
BBLabels
CCDrain Valve
**DD Vent Terminal
EEDrain Pan
FFAnode
GGInsulation
HHUpper Temperature Probe
IIAccess Door
REPLACEMENT PARTS AND DELIMING PRODUCTS
Replacement parts and recommended delimer may be ordered through authorized servicers or distributors. When ordering parts, provide complete model and serial numbers (see rating plate), quantity and name of part desired. Standard hardware items may be purchased locally.
ACCESS PANEL
Caution: This access panel covers a 2” NPT plug that was required during the manufacturing of this water heater. This 2” NPT flange is not a cleanout fitting, removing the 2” NPT plug and using this fitting as a cleanout could void your warranty.
VACUUM RELIEF
VALVE
*INSTALL PER LOCAL CODES
* CAUTION HARNESS HAS 120 VAC. IN OPERATION.
** See “Planning the Vent System,” “Installation of Vent System” and “Condensate” for more information.
FIGURE 1.
6