Sterling SDA 150-380, 90-225 CFM Available Option Boards, Parameter, Setting range, Factory

		Initialize
Setup	6UE1 Control Output 1		Heat/Cool/Alarm 1/Alarm 2/Alarm 3/			Heat	Default
		Assignment			LBA
Setup	6UE2 Control Output 2		Heat/Cool/Alarm 1/Alarm 2/Alarm 3/			AL-1	Default
		Assignment			LBA
Setup	Sub 1 Auxiliary Output			Alarm 1/Alm 2/Alm 3/LBA/S.ERR/E333		AL-1	Default
		1 Assignment
Setup	ALE1 Alarm 1 Type			0 to 11		2	Default
Setup	AL1n Alarm 1 open in			NO/NC		NO	Default
		alarm
Setup	ALE2 Alarm 2 Type			0 to 11		2	Default
Setup	AL2n Alarm 2 open in			NO/NC		NO	Default
		alarm
Setup	ALE3 Alarm Type			0 to 11		2	Default
Setup	AL3n Alarm 3 open in			NO/NC		NO	Default
		alarm
Setup	6rEu Direct/Reverse			OR-R/OR-D		OR-R	Default
		Operation
Mode		Parameter			Setting range	Default	Factory
							setting
Expansion		SL-H Set Point Upper			SP Lower Limit +1 to Scaling Upper	1300	400.0
		Limit			Limit
Expansion		SL-L Set Point Lower			Scaling Upper Limit to SP Lower Limit	-200	0
		Limit
Expansion		CnEL PID/ON/OFF			PID/ON/OFF	PID	Default
Expansion		SE ST Adaptive Tuning			OFF/ON	OFF	Default
		(Fuzzy)
Expansion		SE-b ST Stable Range			0.1 to 999.9 °C/F	15	Default
Expansion		ALFA α			0.01 to 1.00	0.65	Default
Expansion		AE-G AT Calculated			0.1 to 10.0	1.0	Default
		Gain
Expansion		rESE Standby			0/1	0	Default
		Sequence Reset
		Setting Method
Expansion		rEE Automatic Return			0 to 99 SEC	0	Default
		of Display Mode
Expansion		AE-H AT Hysteresis			0.1 to 9.9% FS	0.2	Default
Expansion		LbAb LBA Detection			0.0 to 999.9% FS	0.2	Default
		Width

Option Boards

Available Option Boards

Cabinet Series Dehumidifying Dryer 44