Sterling SDA 150-380, 90-225 CFM installation manual Maintenance Responsibility

Models: SDA 150-380 90-225 CFM

1 52
Download 52 pages 28.89 Kb
Page 9
Image 9

„NEVER place your hands or any part of your body in any dangerous location.

„NEVER operate, service, or adjust the dryer without appropriate training and first reading and understanding this manual.

„NEVER try to pull material out of the dryer with your hands while it is running!

„Before you start the dehumidifying dryer, check the following:

Remove all tools from the dryer;

Be sure no objects (tools, nuts, bolts, clamps, bars) are laying in the area;

„If your dryer has been inoperative or unattended, check all settings before starting.

„At the beginning of your shift and after breaks, verify that the controls and other auxiliary equipment are functioning properly.

„Keep all safety guards in place and in good repair. NEVER attempt to bypass, modify, or remove safety guards. Such alteration is not only unsafe, but will void the warranty on your equipment.

„When changing control settings to perform a different mode of operation, be sure selector switches are correctly positioned. Locking selector switches should only be adjusted by authorized personnel and the keys removed after setting.

„Report the following occurrences IMMEDIATELY:

unsafe operation or condition

unusual dryer action

leakage

improper maintenance

NEVER stand or sit where you could slip or stumble into the dehumidifying dryer while working on it.

„DO NOT wear loose clothing or jewelry, which can be caught while working on the dryer. In addition, cover or tie back long hair.

„Clean the dehumidifying dryer and surrounding area DAILY, and inspect the machine for loose, missing or broken parts.

„Shut off power to the dryer when it is not in use. Turn the switch to the OFF position, or unplug it from the power source.

Maintenance Responsibility

Proper maintenance is essential to safety. If you are a maintenance worker, you must make safety a priority to effectively repair and maintain equipment.

Before removing, adjusting, or replacing parts on a machine, remember to turn off all electric supplies and all accessory equipment at the machine, and disconnect and lockout electrical and pneumatic power. Attach warning tags to the disconnect switch and air shutoff valve.

When you need to perform maintenance or repair work on a dehumidifying dryer above floor level, use a solid platform or a hydraulic elevator. If there is a permanently installed catwalk on your dryer, use it. The work platform should have secure footing and a place for tools and parts. DO NOT climb on the dehumidifying dryer, machines, or work from ladders.

Cabinet Series Dehumidifying Dryer

8

Page 9
Image 9
Sterling SDA 150-380, 90-225 CFM installation manual Maintenance Responsibility