WARNING!
DO NOT LET THE SCREEN CHAMBER DROP!! Guide cradle to it’s resting position.
6. Remove the screen(s) and place them upright on their side.
CAUTION!
The knives mounted on the rotor, and the bed knives located at the edges of the cutting chamber, are extremely sharp. Always wear heavy gloves and exercise care when working in the cutting chamber.
5-2 Closing Screen Chamber
1.Ensure all tools, screws, and debris is removed from the inside of the screen chamber.
2.Place the screen back into its original position, ensuring it is fully seated within the cradle, then CAREFULLY raise the chamber to its closed position. Tighten the captive screws.
3.Insert hopper into the two clips located on either side of the unit walls (see photo).
Discharge should be inserted into these clips located on either side of the unit.
4.Before leaving the area, make sure all components are connected properly.
5.Replace access cover and close doors on optional enclosures.
BP1620, BP1628 & BP1640 Granulators | Page 21 BP1600 |
