7 | Startup Checklist |
|
|
7-1 Introduction
After all electrical and mechanical machine elements have been inspected and any defects corrected, the machine can be put into production once the
7-2 Fan Evacuation
Sterling granulators can be supplied with an optional fan system to provide efficient, continuous evacuation of granulate from the machine. Sterling offers a large variety of fan configurations. The following information is intended to be representative of the basic functioning and design of a fan, rather than being specific to one particular configuration. Please follow the instructions listed below for optimal fan operation, if your unit is equipped with this option.
7-3 Granulator Startup Checklist
Have all installation and preparation instructions been read and followed?
Have the granulator operator and all other necessary personnel been fully trained on machine operation and all safety mechanisms?
Have sufficient service location clearances been allowed?
Has the equipment been grounded as required by local codes and/or Article 250 of the National Electric Code?
Have all motors been checked for rotation?
Have all machine controls, pushbuttons, and interlock switch safeties been checked for proper functioning?
Have the cutting chamber and screen chamber been checked for foreign matter?
Have the drive belts and optional fan drive belts been checked for alignment and tension?
Is the machine properly closed with all visible fasteners tight?
BP1620, BP1628 & BP1640 Granulators | Page 24 BP1600 |
