It is important to note that the minimum dimensions given for the rotor knife and bed knife cannot be combined simultaneously to produce a cutting combination.
NOTE: Replacement knife sets and knife resharpening services are available from Sterling. Contact the Customer Service Department at (800)
Figure 5
Bed Knife Sharpening
9-8 Bed Knife Installation & Setting
1.Install the new or resharpened bed knives, and clamps in the reverse of removal. Make sure the knives are fully back against the knife adjusting screws and loosen the adjusting screw checknuts slightly. Do not torque the hex head screws fully at this point
CAUTION!
New or resharpened knives should be handled with extreme care. It is suggested that the sharp cutting edge be covered with tape to prevent damage to the knives or injury to personnel during installation.
BP1620, BP1628 & BP1640 Granulators | Page 36 BP1600 |
