Sterling SGFE operating instructions Control system, Operation

Control system

3.2. Control system

The facility’s control system is factory-programmed. Nevertheless, you have to set specific values (basic parameters) which are dependent on the processed material, for instance.

The set values are saved and remain saved even after switching off or after a po- wer fail. All entries are saved and can also be viewed at a later point in time. All messages are displayed in plain text.

D

C

AB

I: 1 2 3 4 5 6
Mo 08:33
Q: 1 2 3 4	RUN
	ESC	OK
	E

A=Lamp“ope ration”

B=Lamp“alarm”

C = Main switch

D = Key “Reset”

E = Control unit

Switchbox

SM4-618

3.2.1. Operation

The control system is operated via the keys “ESC”, “OK” and the arrow keys (A).

Messages are displayed on a four-line display.

In the first display line the parameter de- signation is displayed.

In the second display line the set value of the parameter is diplayed.

In the last display line the actual value of the parameter is displayed.

B01 : T
T = 01.00s	A
Ta= 00.00s
ESC	OK

Start-up 3-2