Transport
Install the equipment such that all parts are easily accessi- ble; this facilitates maintenance and repair work.
5.1. Transport
For transport, only the appropriate lifting gear should be used (eg fork lift or work- shop crane).
»Please ensure the adequate carrying capacity of the lifting gear. Please observe all safety regulations for the operation of lifting
gear.
5.2. Installation
The location of the control unit should be chosen so that a clear view of the sepa- rators is guaranteed from the control unit. Thus any malfunctions which arise can be corrected more easily.
»The main switch on the control unit must be freely accessible at all times.
5.3. Material feed
Suction pipes type MV may be tilted by approx. 45 degrees in either direction to the vertical. Additional fastening is not required.
When conveying from the bottom of storage containers (silos), a suction box with
The connection of the suction pipes must be carried out with a piece of flexible line to provide sufficient movement.
