For the operating safety of the equipment
1.3. For the operating safety of the equipment
Never change settings if the consequences are not precisely known.
Use only original Sterling spare parts.
Please observe the maintenance schedule.
Keep record of all maintenance and repair work.
Please note that electronic components may be damaged by static discharge.
Check all electrical connections for proper fit before the equipment is taken into operation for the first time and at regular intervals.
Please ensure that the permitted operation temperature lies between 0 °C and +45 °C (32°F and 113°F).
Please ensure that the permitted storage temperature lies between
Note down all setting data.
After connection to the electricity supply has been made, check the rotational di- rection of the vacuum generators (note the direction indicated by the arrow).
Please ensure that all plugs are correctly plugged in.
The operating instructions of the connected machines must be followed.
All components must be sufficiently grounded.
Please note that a compressed air supply is required for the operation of the unit.
Never set a higher operating pressure than 6 bar (87.02 PSI) for the unit (system overpressure).
Align the suction tubes correctly.
Please note that the maximum permitted ambient and air temperature on entry to the vacuum generator is 40 °C (104°F).
Safety instructions
