Sterling operating instructions SSE-2 6.1. General, Functional description

SSE-2

6.1. General

The single conveyor unit functions accor- ding to the principle of suction conveyance. A high-performance turbine, mounted per- manently on the device, provides for the vacuum that is required to convey the ma- terial into the separator.

In the separator the material is separated from air. After the conveying time is finis- hed the turbine is switched off and the ma- terial emptied into the material intermedi- ate hopper. If the filling level remains below the outlet flap of the single conveyor unit, a starting pulse is triggered and sent to the controller.

The filter will be cleaned (passive cleaning) or blowed off using compressed-air (optio- nal, active cleaning). Then the conveyance is restarted. This process repeats so often until the material intermediate hopper is fil- led. Afterwards the conveyance is stopped until a new starting pulse is triggered and sent to the controller.

SM4-615

Functional description 6-2