2-2 Installing the Conveyor Hopper
The single conveyor unit is insensitive to shocks and can be installed directly on the processing machine.
Make sure that all connections are tight so that the conveying performance is not impaired. The conveyor hopper is equipped with a universal flange.
Depending on the position, drill the holes for fastening the conveyor hopper to the processing machine.
Mount the conveyor hopper on the processing machine.
Install the vinyl flexible hose on the conveyor hopper and on the venturi assemblies using the hose clamps that are part of the supply.
Note: The hopper should not touch any other component.
4.3 In. (110 mm)
0.43 In.
(11 mm)
4.3In.
(110 mm)
12 of 36 |
