Sterling SSV-052R, SSV-05R operating instructions Maintenance

Models: SSV-05R SSV-052R SSV-05

1 37
Download 37 pages 2.77 Kb
Page 22
Image 22

Chapter 5: Maintenance

This chapter is intended for persons with skills in electrical and mechanical areas due to their training and experience.

Personnel using the information in this chapter must be educated about accident prevention, operating conditions, and safety regulations. Make sure that all personnel are informed accordingly.

For maintenance work taking place at heights of over approx. 6 ft., use only ladders or similar equipment and working platforms intended for this purpose. At greater heights, personnel must wear the proper equipment for protection against falling.

Use only suitable lifting gear, which is in proper working order, and load suspension devices with adequate carrying capacity.

Do not stand or work under suspended loads!

Make sure that the electric motors/switch cabinets are adequately protected against moisture.

Use only proper work shop equipment.

Before starting maintenance work, appoint a supervisor.

Inform the responsible personnel before any maintenance work on the system is started.

Never operate the equipment when it is partially disassembled.

All maintenance and repair work not described in this chapter may only be carried out by service personnel or authorized personnel (appointed by the manufacturer).

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style

21of 36

Page 22
Image 22
Sterling SSV-052R, SSV-05R operating instructions Maintenance