2-5 Electrical Connection

Check with the local electricity board for regulations.

The operating voltage is 110 V, AC, PE, 50/60 Hz. Special voltages available by request.

The connected load is approximately 15 W.

The connection is made using a mains connector. A separate protection of the socket is not necessary.

Connect the plug of the sensor cable to the control unit.

Plug the main connector into a corresponding socket.

XSV-05, XSV-05/R, & XSV-05/2R Single Conveying Units - Venturi Style

15 of 36

Page 16
Image 16
Sterling SSV-052R, SSV-05R Electrical Connection, Check with the local electricity board for regulations