Sterling Plumbing 150, 225, 90, 100 Parameter, Factory, Cabinet Series Dehumidifying Dryer

Level 2	Cn5L input shift lower limit		-999.9 to 999.9°C	0.0	Default
Mode		Parameter	Setting range	Default	Factory
					setting
Setup		Cn-t Input Type	0 to 21	2	17
Setup		Cn-H Scaling Upper Limit	Scaling Lower Limit +1 to	-100	15°F/-9C
			9999 EU
Setup		Cn-L Scaling Lower Limit	-1999 to SP Setting Upper	0	-40°F/-40C
			Limit –0.1 EU
Setup		dP Decimal Point	0 to 3	0	Default
Setup		CnCE Parameter Initialize	Yes/No	No	Default
Setup		6Ut1 Control Output 1	Heat/Cool/Alarm 1/Alarm 2/	Heat	COOL
		Assignment	Alarm 3/LBA
Setup		6Ut2 Control Output 2	Heat/Cool/Alarm 1/Alarm 2/	AL-1	Default
		Assignment	Alarm 3/LBA
SetUp		Sub 1 Auxiliary Output 1	Alarm 1/Alm 2/Alm 3/LBA/S.	AL-2	Default
		Assignment	ERR/E333
Setup		ALt1 Alarm 1 Type	0 to 11	2	8
Setup		AL1n Alarm 1 open in alarm	NO/NC	NO	Default
Setup		ALt2 Alarm 2 Type	0 to 11	2	8
Setup		AL2n Alarm 2 open in alarm	NO/NC	NO	Default
Setup		6rEU Direct/Reverse	OR-R/OR-D	OR-R	Default
		Operation
Expansion		SL-H Set Point Upper Limit	SP Lower Limit +1 to	1300	15°F/-9C
			Scaling Upper Limit
Expansion		SL-L Set Point Lower Limit	Scaling Upper Limit to Sp	-200	-40°F/-40C
			Lower Limit
Expansion		CntL PID/ON/OFF	PID/ON-OFF	PID	ON-OFF
Expansion		rESt Standby Sequence	0/1	0	Default
		Reset Setting Method
Expansion		rEt Automatic Return of	0 to 99 SEC	0	Default
		Display Mode

6-8 Restoring the E5CK Temperature Controller and Dew Point Meter to Factory Setup

If preset parameters on the controller have been tampered with and it no longer properly controls temperature and displays dew point, you can restore the controller to factory setup.

Cabinet Series Dehumidifying Dryer 47