Sterling Plumbing 90 Option Type, RE232C, RS-485, Event Input, Transfer Output, Mode, Parameter

Option Type		RE232C		RS-485		Event Input		Transfer Output
Board Number		E53-CK01	E53-CK03			E53-CKB			E53-CKF
Mode	Parameter				Setting range		Default			Factory
										setting
Option	Eu-A Multi-SP Function				0/1		0			Default
Option	Eu-1 Event Input Assign 1				STOP/MAN		STOP			Default
Option	SbCE Communication Stop Bit				½ BITS		2			Default
Option	Len Comm. Data Length				7/8 BITS		7			Default
Option	PrEY Commication Parity				None/Even/Odd			Even		Default
Option	6PS Comm. Baud Rate				1.2/2.4/4.8/9.6/19.2		9.6 kbps			Default
Option	U-n6 Comm. Unit No.				0 to 99		0			Default
Option	Er-E Transfer Output Type				SP/SP-M/PV/O/C-O			SP		Default
Option	Er-H Xfer Output Upper Limit				5		5			Default
Option	Er-L Xfer Output Lower Limit				5		5			Default

Restoring Factory Defaults on the Dew Point Controller

1.Make sure jumper setting for input type is set for Current Input (I), right jumper.

2.Return controller to housing.

3.Press the Display button for one (1) second to enter Menu Display.

4.Press the Arrow Up button to switch between menus.

5.To switch parameters within a menu, press Up Arrow button.

Figure 9

Setting List for Dew Point Controller, Part No. A0548567

Mode	Parameter	Setting range	Default	Factory
				setting
Protect	SECr Security	0 to 6	1	3
Protect	YEYP A/M Key Protect	ON/OFF	OFF	ON
Manual	Manual MV	-5.0 to 105.0 %	0.0	Default
Level 0	SP Set Point	SP lower limit to upper limit EU	0	Default
Level 0	r-S Run/Stop	Run/Stop	Run	Default
Level 1	AL-1 Alarm Value 1	-1999 to 9999 EU	0	-10.0°F/-23°C
Level 1	AL-2 Alarm Value 2	-1999 to 9999 EU	0	-10.0°F/-23°C
Level 1	C-db Dead Band	-19.99 to 99.99%FS	0.00	Default
Level 1	HYS Hysteresis (Heat)	0.01 to 99.99% FS	0.10	Default
Level 1	CHYS Hysteresis (Cool)	0.01 to 99.99 FS	0.10	Default
Level 2	SPrU Sp Ramp Time Unit	M(Minutes)/H(Hours)	M	Default
Level 2	SPrt Sp Ramp Set Value	0 to 9999 EU	0	Default
Level 2	CnF Input Digital Filter	0 to 9999 SEC	0	Default
Level 2	ALH1 Alarm 1 Hysteresis	0.01 to 99.99%	0.02	Default
Level 2	ALH2 Alarm 2 Hysteresis	0.01 to 99.99%	0.02	Default
Level 2	Cn5H input shift upper limit	-199.9 to 999.9°C	0.0	Default

Cabinet Series Dehumidifying Dryer 46