4-2 Process Air Dew Point Display
The Dew Point display indicates the current process air delivery moisture content. The display uses a
4-3 Process Air Temperature Controller
Our dehumidifying dryers use a
LED | Description |
Indicator |
|
|
|
Process Value | During normal operation, the process value (PV) |
Numerical | numeric LED indicator displays the process |
LED | temperature at the To Process thermocouple. It |
| also lists parameters during setup and error |
| messages if any errors occur. |
|
|
Set Value | During normal operation, the set value (SV) |
Numeric LED | numeric LED indicator displays the process set |
| point you selected for the dryer. The dryer then |
| maintains this set point temperature. This LED |
| indicator also displays parameter and |
| function values during setup. |
|
|
OUT1 | Lit when control output 1 turns on. The Out |
| indicator lights when the controller signals the |
| process heaters to be energized. |
|
|
OUT2 | Lit when control output 2 turns on. Not used in |
| this application. |
|
|
MANU | Lit when the manual operation mode is being |
| used. |
|
|
STOP | Lit when control operation has been stopped. Not |
| used in this application. |
|
|
RMT | Lit during remote operation. Not used in this |
| application. |
|
|
AT | Flashes during |
|
|
SUB1 | Lit when the output function assigned to auxiliary |
| output 1 turns on. |
|
|
Cabinet Series Dehumidifying Dryer | 19 |