First Aid:

In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists, see a physician.

6-5 Replacing Worn Desiccant

Caution! Make sure desiccant beds are sufficiently cool before replacing worn desiccant.

1.Disconnect the electrical and compressed air supply.

2.Remove the rear and side shrouds to expose the desiccant beds.

3.Free the bed covers by removing the hex nuts on the retaining rods and remove the upper screens from both beds.

4.Remove the desiccant in one of the following ways:

•Vacuum out the desiccant.

•Remove the entire bed from the frame and dump it out. To do this, remove the hose connections, unclamp the beds, and unbolt from the regen heater assembly.

Make sure the bed interiors are clean.

Important!

You should properly dispose of any discarded desiccant.

 

Consult local disposal regulations for more information.

Before re-packing the beds, determine the proper amount of desiccant for the dryer being serviced. See Figure 14 on the following page for more information. Pre-measured desiccant kits are available from the manufacturer’s parts department.

Attach the beds to the frame for Steps 5 through 9.

5.Carefully place half of the large bead in the bottom of the beds, in an even layer, on the bottom screen. Place the small bead on top of it, in an even layer. Carefully place an even layer of the remaining large beads over the small beads.

6.Install the top screen, making sure that the edge is in contact with the sides of the bed all the way around. Install the washers and nuts and tighten down. Gently tap the around the sides of the desiccant canister with a rubber mallet to settle the desiccant. As settling occurs, re-tighten the nuts. Repeat the tapping and tightening process until little additional settling occurs.

7.Install the covers and gaskets on the beds, making sure they are tight and sealed. Replace desiccant bed gasket if necessary.

8.Re-connect any hoses that were disconnected.

9.Re-install the rear and side shrouds. Re-connect the compressed air supply and electrical power.

Cabinet Series Dehumidifying Dryer

40

Page 39 Page 41
Page 40
Image 40
Sterling Plumbing 225, 90, 150, 100, Cabinet Series Dehumidifying Dryer installation manual Replacing Worn Desiccant, First Aid
Page 39 Page 41

100, 150, 90, Cabinet Series Dehumidifying Dryer, 225 specifications

The Sterling Plumbing 150, 225, 90 Cabinet Series Dehumidifying Dryer is a state-of-the-art appliance designed to effectively eliminate excess moisture in various environments. This versatile dryer is ideal for residential, commercial, and industrial applications, providing reliable moisture control to enhance air quality and prevent damage due to humidity.

One of the main features of the Sterling Plumbing Dehumidifying Dryer is its impressive moisture removal capacity. With options available for 150, 225, and 90 pint per day configurations, this unit can cater to different sizes and types of spaces, making it a suitable choice for everything from small basements to large warehouses. Its cabinet design allows for efficient air circulation, maximizing its dehumidification capabilities while remaining compact and easy to install.

The technology integrated within the Sterling Plumbing Dehumidifying Dryer is advanced, incorporating a high-efficiency compressor and a durable, corrosion-resistant housing. This ensures that the unit operates quietly and efficiently, providing a long service life with minimal maintenance required. The dryer features an automatic humidistat that monitors the humidity levels in the environment, adjusting its operation to maintain desired settings without manual intervention. This smart technology not only conserves energy but also ensures optimal performance.

In addition to its dehumidification function, the Sterling dryer is equipped with a built-in air filtration system that captures dust and allergens, contributing to overall indoor air quality. The easy-to-clean filters are designed for durability, ensuring that the unit remains functional and effective over time.

Another notable characteristic of the Sterling Plumbing Dehumidifying Dryer is its user-friendly interface. The control panel is designed to be intuitive, allowing users to easily set their preferred humidity levels and adjust operation modes. With options for continuous drainage, users can also opt to run the unit without worrying about emptying the water tank frequently.

Overall, the Sterling Plumbing 150, 225, 90 Cabinet Series Dehumidifying Dryer is a powerful, efficient, and reliable moisture management solution. With its blend of advanced technology, user-friendly features, and robust design, it is an essential appliance for anyone looking to improve indoor air quality and protect their space from the damaging effects of excess moisture.
Top Page Image Contents